9.2 Addition of isospins
(a) Clebsch–Gordan coefficients
Isospins add like angular momenta: \(I = \lvert I_1 - I_2\rvert,\ldots,I_1 + I_2\) with \(I_3 = I_3^{(1)} + I_3^{(2)}\), and \(\lvert I, I_3\rangle = \sum C^{I_1I_2I}_{m_1m_2I_3}\lvert I_1,m_1\rangle\lvert I_2,m_2\rangle\) with the usual Clebsch–Gordan coefficients. The “stretched” state of largest \(I_3\) is a single product; lowering it with \(I_- = I_-^{(1)} + I_-^{(2)}\), \(I_-\lvert I,m\rangle = \sqrt{(I+m)(I-m+1)}\,\lvert I,m-1\rangle\), and orthogonality give the rest. A state at the end of a multiplet such as \(\pi^+p\) or \(pp\) is therefore always pure isospin. For two nucleons (\(\tfrac12\otimes\tfrac12 = 1\oplus0\)) \[\lvert1,1\rangle = pp,\quad \lvert1,0\rangle = \tfrac{1}{\sqrt2}(pn + np),\quad \lvert1,-1\rangle = nn,\quad \lvert0,0\rangle = \tfrac{1}{\sqrt2}(pn - np),\] so \(pn = (\lvert1,0\rangle + \lvert0,0\rangle)/\sqrt2\) is half \(I = 1\) and half \(I = 0\); the deuteron has \(I = 0\). For a pion and a nucleon (\(1\otimes\tfrac12\), pion first, \(\pi^{+,0,-} = \lvert1,+1\rangle,\lvert1,0\rangle,\lvert1,-1\rangle\)) the coefficients are:
| \(\lvert\tfrac32,+\tfrac32\rangle\) (\(\Delta^{++}\)) |
\(1\) |
|
|
|
|
|
| \(\lvert\tfrac32,+\tfrac12\rangle\) (\(\Delta^{+}\)) |
|
\(\sqrt{1/3}\) |
\(\sqrt{2/3}\) |
|
|
|
| \(\lvert\tfrac12,+\tfrac12\rangle\) |
|
\(\sqrt{2/3}\) |
\(-\sqrt{1/3}\) |
|
|
|
| \(\lvert\tfrac32,-\tfrac12\rangle\) (\(\Delta^{0}\)) |
|
|
|
\(\sqrt{2/3}\) |
\(\sqrt{1/3}\) |
|
| \(\lvert\tfrac12,-\tfrac12\rangle\) |
|
|
|
\(\sqrt{1/3}\) |
\(-\sqrt{2/3}\) |
|
| \(\lvert\tfrac32,-\tfrac32\rangle\) (\(\Delta^{-}\)) |
|
|
|
|
|
\(1\) |
Read down a column, the same numbers give the inverse, for example \(\pi^-p = \sqrt{\tfrac13}\lvert\tfrac32,-\tfrac12\rangle - \sqrt{\tfrac23}\lvert\tfrac12,-\tfrac12\rangle\). For two isovectors (\(1\otimes1 = 2\oplus1\oplus0\)) the \(I = 2\) and \(I = 0\) states are symmetric and the \(I = 1\) states antisymmetric under exchange, e.g. \(\lvert1,0\rangle = \tfrac{1}{\sqrt2}(\lvert1\rangle\lvert{-1}\rangle - \lvert{-1}\rangle\lvert1\rangle)\), so \(\langle1,0;1,0\vert1,0\rangle = 0\). For a \(\Delta\) and a nucleon (\(\tfrac32\otimes\tfrac12 = 2\oplus1\), \(\Delta\) first) the \(I = 1\) states are \[\lvert1,1\rangle = \sqrt{\tfrac34}\,\Delta^{++}n - \sqrt{\tfrac14}\,\Delta^+p,\qquad \lvert1,0\rangle = \sqrt{\tfrac12}\,\Delta^{+}n - \sqrt{\tfrac12}\,\Delta^0p .\]
(b) The scalar product \(\mathbf I^{(1)}\cdot\mathbf I^{(2)}\)
Squaring \(\mathbf I = \mathbf I^{(1)} + \mathbf I^{(2)}\) gives, in a state of total isospin \(I\), \[\boxed{\,\mathbf I^{(1)}\cdot\mathbf I^{(2)} = \tfrac12\big[I(I+1) - I_1(I_1+1) - I_2(I_2+1)\big]\,}\] which is \(+\tfrac14\) (\(I = 1\)) and \(-\tfrac34\) (\(I = 0\)) for two nucleons, and \(+\tfrac12\) (\(I = \tfrac32\)) and \(-1\) (\(I = \tfrac12\)) for a pion and a nucleon. An isospin-invariant potential \(V = F(r)\,\mathbf I^{(1)}\cdot\mathbf I^{(2)}\) is thus \(F(r)\) times a different constant in each channel; at low energy (Born approximation) the amplitude is proportional to that constant and the cross-section to its square.
(c) Isospin invariance of amplitudes
By isospin invariance (the Wigner–Eckart theorem) a strong amplitude between states of definite isospin depends only on